Our Senyang T08 inflatable mattress for bed sores pairs a 20-cell, three-layer mattress with the electrically powered P06C pump. It is a pressure-care system for bed use, rather than a manually inflated leisure air bed. Correct positioning and connected air hoses are part of preparing the system for use.
The mattress combines alternating upper sections with a static bottom layer and pillow section. Its air-cell material options, PU cover and available widths allow different configurations to be selected before installation.
Air mattress for bed sores sont disponibles dans une variété de dimensions et de styles afin de répondre aux besoins de différentes personnes.

The reference dimensions are 80 inches in length, 32–36 inches in width and 9 inches in height, with 20 air cells. Wider 42-inch and 48-inch versions are available. These are configuration choices, not width settings on the pump.
The listed mattress capacity is 210 kg, and its reference net weight is 8.35 kg. Confirm the selected configuration when considering handling and bed suitability; the mattress net weight does not include the pump or packaging.
Measure the usable platform rather than judging fit from the bed's outer frame. Check the chosen width, mattress height, available rail clearance and any moving bed sections together. The intended installation arrangement should follow the system instructions rather than assuming that every inflatable mattress belongs on top of an existing mattress.
Position the pump and hoses according to the supplied setup instructions. Keep hoses away from sharp edges, moving mechanisms and places where bedding or furniture could compress them. When the bed position changes, check that the hose route remains clear.
The air connections must match the supplied T08 configuration. Connectors should be secure and the CPR release should be in the normal operating position before routine inflation. Do not close off access to the CPR release with bedding or other equipment.
The P06C requires the correct electrical supply for the supplied version. Use the pump label and instructions to establish the required voltage and connection; do not assume that every version has the same plug merely because the mattress dimensions are identical.

Allow the system to inflate according to its instructions before use. The operating state, air connections and mattress response should be checked rather than relying on an unverified number of minutes. We do not specify one universal inflation time for every width, configuration and starting condition.
The P06C provides a touch panel, digital LED display and remote control. Pressure and cycle time can be adjusted, and the system includes static mode, seating mode, AutoFirm, panel lock and an audible alarm. Use these functions for their defined purposes rather than treating AutoFirm as an instruction to leave every user at maximum firmness.

Select the mattress to match the assessed bed arrangement. A wider mattress is not automatically suitable simply because it has the same length.
This configuration uses the P06C electric pump. Follow the supplied connection and inflation instructions rather than adding an unrelated pump.
No. The cover and electrical pump need different cleaning methods. Follow the component-specific instructions and do not immerse the pump.
Share your bed platform measurements and preferred mattress width with us. We can confirm the T08 configuration and provide the relevant P06C setup information.