At Senyang, we manufacture pressure-care products with a focus on comfort, practical use and quality. Our T01 pressure relief mattress for hospital bed pairs with the P01 pump to provide alternating air support during bed rest. The system combines an A/B air-cell arrangement, a PU cover and a choice of mattress heights and cell counts.
Designed for people who spend extended periods in bed, the T01 and P01 combination supports pressure redistribution as part of an individual care plan. Its role is to vary support across the mattress surface, alongside appropriate repositioning, skin observation and other care measures recommended for the user.
The T01 uses two connected air-cell groups, identified as A and B. During alternating operation, these groups change inflation in sequence. This changes where the surface provides support over time rather than maintaining the same support pattern continuously.
The mattress construction includes Nylon PVC air cells, a separate PU cover and a PVC tarpaulin base. Each part serves a different purpose: the cells contain the air, the cover forms the outer contact surface, and the base forms the underside of the mattress. The cover material should not be confused with the air-cell material.
We also offer Nylon TPU and alternative cover configurations within the T01 range. Material and cover options are selected when specifying the mattress; they are not settings that can be changed on the pump. Where a waterproof or flame-retardant cover is required, the appropriate cover specification should be selected.
The T01 includes a CPR air-release feature for rapid air release in an emergency. Keep the release accessible and follow the supplied instructions and emergency procedures when it is needed. It is separate from routine pressure adjustment.

The P01 pump supplies air to the connected mattress groups and supports the alternating cycle. Used together, the mattress and pump form a working system: the pump manages the air supply, while the air cells form the body-support surface.
Pressure adjustment and cycle time describe different aspects of operation. The pressure setting relates to the support supplied by the air system; cycle time describes the alternating sequence. A cycle lasting around 12 minutes does not mean that the mattress is fully inflated from empty in 12 minutes.
The P01 pump is available in 110 V / 60 Hz and 220 V / 50 Hz versions, with an air output of at least 6 L/min and a rated power consumption of 12 VA. Use the supply specified on the delivered pump label and in its instructions.
The operating setup should follow the supplied instructions and the user's assessed needs; the appropriate pressure is chosen for the individual user according to that assessment.


Our existing T01 configuration includes an 80-inch length, a selected width within the 32–36-inch range, and a 5-inch height with 16 air cells. Other available constructions include 4.5 inches with 18 cells and 4 inches with 24 cells.
These are three different mattress configurations, not three adjustable heights on one mattress. Height and cell count describe the construction of the support surface, and the required version is selected before supply.
The mattress net weight does not include the pump or packaging.

Before selecting a width and height, consider the usable bed platform rather than only the bed frame's outside dimensions. The mattress should be assessed together with the bed's rail arrangement, moving sections and intended installation method.
A taller mattress changes the overall support-surface height. This can affect the space around rails and the user's access to the bed, even where the length and width fit. Follow the applicable bed and mattress instructions rather than assuming that every air mattress can be placed over an existing mattress.
Arrange the air hoses clear of sharp edges and moving mechanisms. After raising or lowering a bed section, check that the mattress has not shifted and the hoses are not kinked, pulled tight or compressed. Keep bedding smooth without drawing it tightly across the support surface.
The T01 and P01 combination can be considered for hospital-bed and home-care arrangements where an alternating air surface is appropriate. Selection depends on the individual, the bed and the wider care plan, not the setting's name alone.
During use, observe the person's position and comfort as well as the condition of the cover, connections and hoses. Clean the mattress cover and pump using their respective instructions, allow cleaned surfaces to dry, and do not immerse electrical equipment.
If support changes unexpectedly or the system does not operate as instructed, follow the supplied troubleshooting and user-safety guidance and obtain assistance where needed.
Our focus is to provide a clearly specified mattress-and-pump combination, with attention to material selection, construction and quality control. We can discuss the T01 height and cell options, cover requirements and the electrical version of the P01 pump for your intended use.
Sharing the bed platform dimensions and required mattress configuration helps us respond with relevant product information rather than treating every hospital bed as identical.
No. P01 and P01S are different variants with different functions. The T01 on this page is paired with the P01 pump, and the functions of another variant should be confirmed against its own instructions.
No. Alternating cycle time and initial inflation time are different specifications. Follow the setup instructions rather than using the cycle figure as a universal waiting time.
Do not treat the names as interchangeable. This page describes the T01 with P01. Functions offered on a different pump variant should be checked separately rather than assumed to be included.
No. Weight capacity is one specification. Bed compatibility, the selected mattress construction and the person's assessed care requirements also matter.
Yes. T01 range options include Nylon PVC or Nylon TPU air-cell materials and different cover configurations. Contact us to confirm the available combination for your requirements.
Contact Senyang to discuss the T01 pressure relief mattress for hospital bed and P01 pump. Tell us your bed dimensions, preferred mattress height, cover requirements and intended supply location so we can help identify the appropriate configuration.