The Senyang C02 is a battery-powered air cushion used for supporting pressure redistribution during long periods of time in a seated position. This product consists of 5 nylon-TPU (thermoplastic polyurethane) air cells and can be operated with either the rechargeable P08M pump which provides alternating pressure or timed static support. Both products make up a compact seating system that can be used on compatible wheelchairs and care chairs.
Unlike the manually inflated wheelchair cushion that has only one fixed air setting, the CO2 system alters the level of support by means of the programmed pump operation. There are three pressure options available to the user and an alternating 12 minute cycle will shift the inflation over the entire area of the cushion. If you would like to maintain the same amount of pressure on your cushion for a certain amount of time, there is a static mode option as well.

The five air cells within the C02 cushion are positioned on the wheelchair seat in an alternating manner. The airflow from the pump changes over time rather than remaining in a static location; this allows for redistribution of the user's contact with the sitting area and creates a dynamic relationship between the user and their wheelchair seat.
The dimensions of the cushion are approximately 17.2 inches (length) x 17.2 inches (width) x 3.5 inches (height) and can support a weight of up to 100 kg. The cushion features nylon TPU cells that provide flexibility in conjunction with a waterproof inflatable structure. Additionally, the cushion has a polyurethane cover that allows for easy maintenance during daily use and cleanings.
During the P08M pump's alternate mode operation, it will run for 12 minutes. There are two primary differences between the C02 and a stationary wheelchair air cushion; first, how much time can pass before the user has to change their position, and second, the frequency at which the user needs to reposition him/herself. This type of air cushion is ideal for people who use wheelchairs for long periods of time and require a dynamic method of distributing their weight.
The pump has two other modes that are available to set to 10 minutes or 20 minutes. These modes will allow you to maintain a constant air pressure in the cushion during that time frame, if you want to use the cushion as a static seat. At the end of that time, you can go back to using your regular seating schedule.

The P08M offers a choice of 3 different pressure levels (Low- 20 mmHg; Medium- 40 mmHg; High- 60 mmHg). The simple to use, clearly marked pressure controls allow for easy adjustments to the wheelchair air cushion, as opposed to adjusting the cushion using an unmarked control. Adjusting the pressure will alter the stiffness of the seating support, and can be adjusted as needed by changing the seating environment.
The pump's air flow rate is 6 to 7 liters per minute, and it will fill the five cells in the cushion. Users and/or care providers will be able to see their current settings for pressure and the amount of battery left on the display so they can make sure everything is functioning properly while the pump is operating.
The P08M operates on an input of 100-240V AC at 50/60Hz. It has a 22.2V DC lithium battery with a capacity of 2000 mAh. Under the specified operating conditions, when fully charged, the battery will provide up to 8 hours of use. As such, the C02 system can be used by individuals in wheelchairs while they are mobile (i.e., away from a stationary wall outlet) for up to 8 hours each day.
The pump has a small size (275 x 140 x 95 mm) and weighs 1.8 kg. This is a very convenient size to carry around when used with the wheelchair cushion. Also, there is a battery indicator that will allow the user to schedule their charging times based on how long they plan to be out of reach of an electrical outlet.

Measure the usable wheelchair seat area prior to selecting the cushion. The C02 must lie flat upon a stable surface, be supported along the entire width and length of the seat, and not interfere with the operation of wheel locks, arm supports, or the user's transfer area. The 3.5 inch height of the cushion will also need to be taken into account when considering the user's footrest and armrest positioning, as well as the user's transfer position.
Place the pump in an area that allows the air line connection to remain tight, while being able to access the controls for the pump without interfering with wheelchair travel. Ensure that the tubing has no sharp bends, isn't caught up in the frame of the wheelchair, and isn't placed in a location that will cause it to be pulled when transferring.
The four-way stretch polyurethane (PU) cover is water resistant, detachable, and fastens using snaps. Clean the cover using the manufacturer's recommended cleaning procedure, then let it fully dry prior to usage. While performing regular maintenance on your cushion, examine the nylon TPU cells, cover fasteners, tubing and connector fittings. Additionally, ensure that the non-slip bottom surface remains free of dirt and debris to prevent the cushion from moving on the wheelchair seat.
Check the operation of the pump, check the battery level, check the connection to the air supply. If there is a change in the sitting surface, the flow of air or the frequency of cycles compared to what has been approved, inspect the system prior to continued operation. Store the cushion and pump in an area that is clean and dry; protect the air cells from damage by sharp objects and/or high temperatures.

A buyer should evaluate the C02 as part of a system with the P08M pump, rather than evaluating it as an individual cushion. It is important for buyers to verify the cushion size, weight capacity, cover, pump settings, battery requirements, supplied accessories and intended wheelchair type. Having all of this information on file in an approved configuration will help support consistency in sampling, labeling and subsequent order processing.
Senyang can review color schemes, logos, labeling, instructions and packaging with you regarding your CO2 project. Please provide us with the following information so we can answer your inquiry: target market, wheelchair seat measurements, order size, branding requirements, electrical/plug requirements and packaging expectations. We will then verify the configurations that are available prior to producing a sample or beginning production.
No. C02 is a powered alternating pressure cushion used with the P08M pump. This distinguishes it from manually inflated static cushions.
The P08M provides 20, 40 and 60 mmHg settings, together with a 12-minute alternating cycle and 10- or 20-minute static options.
The documented P08M configuration provides up to eight hours of use when fully charged. Actual planning should include battery-level checks before mobile use.
Provide the wheelchair seat dimensions, quantity, destination market, branding, label language, power or plug requirements, accessories and packaging expectations.